Products

Product Information

DC Inverter Spot Welding / Fusing Power Supply

DC Inverter Spot Welding / Fusing Power Supply (IS-800A/1400A)

IS-800A/1400A

Precision waveform control ensures high quality welding!

  • Feature
  • Specification
  • External view
  • Corresponding transformer

Specifications

Model IS-800A IS-1400A
Power requirements ・Three phase, 380-480VAC (50/60Hz)10%
・Three phase, 200-240VAC (50/60Hz)10%
・Three phase, 380-480VAC (50/60Hz)10%
・Three phase, 200-240VAC (50/60Hz)10%
Maximum output current 800A (3%) 1400A (3%)
Number of schedules 255
Output frequency 600Hz~3kHz
Control method) Primary current RMS/ Secondary current RMS/ Secondary power RMS/ Primary current PEAK/ Secondary voltage RMS/ Constant phase
Timer setting msec mode cyc mode
SQUEEZE DELAY 0000~9999ms 000~999cyc
SQUEEZE 0000~9999ms 000~999cyc
UP SLOPE 1,2,3 000~999ms 00~50cyc
WELD 1,2,3 000~999ms 00~50cyc
DOWN SLOPE 1,2,3 000~999ms 00~50cyc
COOL 1,2 000~999ms 00~99cyc
HOLD 00000~20000ms 000~999cyc
OFF 0 or 0010~9990ms 00~99cyc
Transformer turn ratio 1.0~199.9
Pulsation setting 01~19
Valve setting 2
Setting range
(1)Constant current (2)Constant power (3)Constant voltage (4)Constant phase
(1)0.05~40.0kA (2)0.05~60.0kW (1)0.05~80.0kA (2)0.05~120.0kW
(3)0.20~9.99V (4)10.0~99.9% (3)0.20~9.99V (4)10.0~99.9%
Current monitor HIGH 0.00~9.99kA / LOW 0.00~9.99kA HIGH 00.0~99.9kA / LOW 00.0~99.9kA
Power monitor HIGH 0.00~9.99kW / LOW 0.00~9.99kW HIGH 00.0~99.9kW / LOW 00.0~99.9kW
Voltage monitor HIGH 0.00~9.99V / LOW 0.00~9.99V
Pulse width monitor 10~100%
Installation
environment
Ambient temp. 5 - 40℃
Max. humidity 90% (No condensation)
Max. altitude 1000m or below
Mass 38kg 60kg
  • Feature
  • Specification
  • External view
  • Corresponding transformer