Products

Product Information

AC Spot / Series / Fusing Welding Power Supply
(MIB-300A/600A)

AC Spot / Series / Fusing Welding Power Supply (MIB-300A/600A)

MIB-300A/600A

Use AC transformer and improve heat efficiency.
Reduce magnetize and peltier effect on work piece.

  • Feature
  • Specification
  • External view
  • Corresponding transformer

Features

  • Able to keep on using AC welder transformer if you already have
    No need to buy new weld head and transformer if you are already using AC welder for production
  • Reduce burn of coating materials while fusing

    Reduce burn of coating materials while fusing
    Reduce burn of coating materials while fusing

  • Reduce slant abrasion of electrode and unequal size of welding nugget
    Reduce slant heat on one material while welding different material (peltier effect), reduce slant abrasion of electrode and unequal size of welding nugget.
  • Reduce magnetize of work piece around electrode
    Reduce magnetic material around welding current being magnetized.
  • Add secondary constant current control
    Since welding current will be monitored and controlled directly, able to have higher current control than primary constant current control.
  • Increase number of maximum pulsation
    Previous unit: 9 times pulsation maximum → MIB-300A/600A: Maximum 20 times for each WELD1 to WELD3
    Since it suppresses the rapid heating to the work by repeating the welding time and the pause time, it becomes easier to control the amount of displacement compared with continuous welding for a long time.
  • Able to set interrupt, up slope and down slope for all waveform (WELD1 to WELD3)
    Interrupt function (Stop current when displacement value reaches to set level, go on to next step) will avoid work piece to be squashed, able to have more precise setting for welding condition.

    Able to set interrupt, up slope and down slope for all waveform (WELD1 to WELD3)