Products

Product Information

Pulsed Heat Controller

MR-130B

MR-130B

Particular heat control enables precision reflow soldering!

  • Feature
  • Specification
  • External view

Specifications

Model MR-130B
Power requirements Single phase, 180-264VAC, 50/60Hz
Breaker capacity 15A
Temperature Control 600℃ and below ±6℃ or ±2% of reading, whichever is greater
Above 600℃ ±3% of reading
Repeatability ±1% of setting
Display Range 15~999℃
Temperature range Base 25 – 300℃
Preheat 60 – 500℃
Reflow 60 – 999℃
Cool1 25 – 300℃
Post Heat 25 – 999℃
Cool2 25 – 300℃
Idle 25 – 300℃

Time periods

Base 0 – 99.9 seconds
Rise 1 0 – 9.9 seconds
Preheat 0 – 99.9 seconds
Rise 2 0 – 9.9 seconds
Reflow 0.1 – 99.9 seconds
Post Heat 0 – 99.9 seconds

Heating rate capability

coarse heating rate Fast / Medium / Slow / Very Slow
Fine heating rate 0 – 99%
Secondary voltage Fast: 3.81V / Medium: 1.90V / Slow: 1.27V / Very Slow: 0.95V
Cooling method Air cooling
Schedule programming * Front panel or external controller via RS-232C/RS-485C
RS-232/RS-485 Connectors Standard 9 Pin D-Sub female connector
User Programmable Heat Profiles 63
Dimensions (mm) 254(W) x 466(D) x 320(H)
Mass 27kg
Ambient temperature / humidity 15 – 40℃ / 93% (40℃) No condensation
*External controller will be prepared by customers.
  • Feature
  • Specification
  • External view