Products

Product Information

Fiber Laser Handy Welder 600WNEW

Fiber Laser Handy Welder 600W | FLW600MT

FLW-600MT

With 600W oscillator

Space-saving, energy-saving fiber laser handy welder equipped

  • Feature
  • Specification
  • External view
  • Sample

【Handy torch】

Type Types of tip (L-type, straight-type) Built-in protective glass
(Straight type is optional)
Weight 460 g (L-type mounted)
395 g (Straight-type mounted)
Shield gas Argon, nitrogen
Welding conditions Manually select among 90 types
(waveform No. 0 – 120)(waveform No. 0 – 74: standard conditions configured)
Accessories ① Stand for hand-held torch: x 1
② Protective gloves (leather): 1 set
③Protective gloves (conductive fiber): 5 sets
④ Protective glass (Φ12 mm, 2 mm thick): x 10
⑤ Nozzle (Carbon, outer Φ7 mm, inner Φ5 mm, 20 mm long): x 50
⑥ Nozzle (Carbon, outer Φ7 mm, inner Φ5 mm, 12 mm long): x 10
⑦ Dust mask: 20
⑧ Simple clean booth: 1 set

【Oscillator: ML-3060AS】

Oscillator Maximum rated output
(from oscillator)
REPEAT mode 600W
CW mode 550W
Maximum peak power
(from oscillator)
REPEATmode Maximum: 5.500kW
Minimum (power feedback ON): 1.000kW
Minimum (power feedback OFF): 600W
CWmode Maximum: 550W
Minimum (power feedback ON): 100W
Minimum (power feedback OFF): 60W
Pulse width REPEAT mode Standard: 0.2–50.00 ms (0.1ms steps)
[Energy (J)] x [Repetition (pps)] = 600 W or less However, the pulse energy is 60 J or less and the DUTY is 50% or less.

Note: When using the output waveform of 1.200 kW, the pps value is limited to keep the average power below 600 W. As a result, the duty ratio becomes 50% or less. Also, when outputting a waveform with a shot (SHOT = 1), the READY signal is automatically turned off for certain time after laser output to keep the average power below 600 W, and the next laser start is not accepted.
CW mode Standard: 0.1–1000.0 s (0.1s steps)
Repeated number of pulse/modulation 1–1000 pps (REPEAT mode)
Modulation function 1–5000 Hz (rectangular wave, triangular wave, sinusoidal wave) (CW mode)
Oscillation wavelength Fundamental wavelength
Safety shutter With open/close sensor
Positioning guide beam Built-in visible laser (Red)
Prevention of reflected beam Built-in reflected beam sensor
Output stability ±2% or less@600 W per 4 hours (constant temperature)
Power Supply Power Supply Input power supply Single-phase, 200 V to 240 V AC (+10%/-15%)
Frequency 50/60Hz
Max. input current 23A(200V), 21A(220V), 19A(240V)
Max. apparent power 3.8kVA
Power consumption Maximum 3.5kW
Standby 0.2kW
Breaker rated curren 30A
Dimensions 750(W)×750(D)×1250(H)mm
Weight 250kg or less
  • Feature
  • Specification
  • External view
  • Sample